Why steel and Stainless-Steel home decor ……Why Bethliving?

Tradition tells us home decor is done in wood. As we progressed over the last few decades home decor turned out to be created out of wood derivatives. Plywood, MDF, HDF, Multi-wood, particle boards, the list of wood derivatives goes on. Many of them do not have anything to do with wood apart from its name. Produced out of process banned in most of the developed countries, and prevalent only in a country like ours these products are literally a cocktail of harmful chemicals and resins. There are adequate studies available on the harmful effects of contents like formaldehyde, amply available in most of the wood derivatives. So much so some of the products are even unsafe to touch. Most of us know the above facts yet continue to use them for the simple reason for the lack of a known alternative.

It is where the relevance of a more modern alternative and its existence must be bought forth. Steel and Stainless Steel are not new material to mankind. Steel and Stainless Steel has been instrumental to man’s progress through the Industrial era. We have seen steel being part of every walks of our life. They are touching our life’s in every possible way from the small needle to our cookware our cutleries to giant industrial structure, bridges to high tech space missions. Despite all the progress, it took a long time before we found our alternative solutions in steel and stainless steel for our home decor. And this can be attributed to a single reason namely lack an available technology which could craft our home decor to the precision and aesthetics we desire. However, over the last two decades, technology has changed drastically.

That brings us to the modern alternative in home decor. The modern alternative home decor products as indicated is a new concept of home decor all manufactured out of either steel, stainless steel or combinations of the two. But essentially the products come with nine important traits as below.

Fire resistance: The basic material of construction for all Bethliving products are steel and stainless steel which by the very nature is fire resistant if not fireproof. In recent years, Fire safety is attaining an increasing significance in our day to day life. This can be attributed to fire incidents over the last few years and some of it even has its trigger fire in kitchens and modular kitchens. Steel and Stainless steel will be a natural choice to protect our homes and families from fire-related risks.

 

Pest Safety: A tropical country like ours, propagates pest life into our traditional home decor. They literally feed on our home decor products made of wood or wood derivatives and destroy them in a matter of time. To keep this under check most of undertaking an annual exercise of pest control which is nothing but the application of a very heavy dose of pesticides. This puts our families at very high risk of exposure to pesticides.

With home decor from Bethliving, we could literally treat the annual pest control a thing of the past as you will no more need to do that. Our country has thousands of NRI owned houses which are attended only for a few days once a year or two.  This product would leave them intact year after year with least attention.

 

Water Resistance: If we ever wonder, how a steel bridge stays like that over the river Hooghly over decades at Howrah over a decade in rain and shine, the answer lies in the material used and the engineering involved in the execution.

Home decor made of steel and stainless steel are products of the same genus. When the water receded after the recent Kerala floods, our customers just needed a rinsing and cleaning to get back to normal, just goes to show how a simple trait like this will make us and our family prepared to any eventualities in life.

When it comes to water resistance, we have left nothing to chances starting from our design. Our facia panels(doors) are not filled with water absorbing fillings like PUF which would have been an easy route for any manufacturer. Our panels are filled with bonded stingers using some of the finest technology available in today’s world.

 

Hygiene: Hygiene levels of traditional products challenges in multiple areas like cleanability, touch safety, and chemical emission. By putting such products into our homes, we are in a sense putting ourselves and our families right into the Center of such challenges.

Products from Bethliving in steel and stainless steel are touch safe with zero chemical emission, cleanable by direct washing in most of the cases. Besides these home decor products does not need an annual pest control, that makes them even more hygienic.

Stainless Steel is the most modern material apt for kitchens known to mankind. Its corrosion resistance, ease of cleaning, ever shining appearance, and strong physical properties make it the best material for modern kitchens. It has remained accessible only to the privileged few and celebrated chefs. Investments in a stainless-steel kitchen are assured to deliver a hygienic environment with an assured long life. To clean just wash your kitchen with water, hot water or even steam. Unheard of in a traditional wood kitchen, hygiene standards of your kitchen is no more the same again.

In fact, steel and stainless steel home decor product can take our homes to a hygiene level of unprecedented levels and could provide people with an all-new experience of hygiene centric life.

Even in low lying and flood prone areas, all it calls for is a thorough wash with fresh water and your kitchen will spring back to action.

 

Environment friendliness: Time has come to give back nature its due and pays more attention to it. Steel and stainless-steel products do not cut any trees to make your home decor. Besides these products would be 100 percent recyclable as an when you choose to replace them. Manufactured out of the process which is eco-friendly and causing least disturbance to the environment, there cannot be a better way to take care of Mother Earth. Let’s remind you not cutting a tree is far better the planting 100s of them.

 

Noise Free: From our experiences of past the general perception is that steel products are noisy in operation. These perceptions are not completely misplaced given our experience from products available erstwhile in the market.

Times have changed, technology has changed, Bethliving uses some of the best technologies available making them absolutely noise free in operations. Soft closing is a standard option, one need not separately ask for. All our products are equipped with dozens of innovations to give you a noise-free operation. Our engineers and designers work hard to make sure your wardrobe does not make a disturbing level of noise in your bedroom.

 

Maintenance free: Ever wondered, why a pre-independence era bridge in our vicinity still survive all the years of rain and shine. The answer lies in the material and the precise nature of Engineering.

Bethliving products are crafted out of the finest raw materials sourced with sheer passion from similar passion sharing vendors who share our passion for quality. We have designed and packed them with technology that was never used in our industry before.

They are designed and manufactured with such care and a series of quality assurances audits so that you get the products in immaculate shape as you always wanted.

As a token of our confidence in our, some of our products come with a lifetime warranty albeit you may never use that.

 

Ease of installation: Managing carpentry skills poses the most important challenge in any home decor projects at homes. No matter how big or small these projects are,

Beth kitchen and its standardization have ensured high-quality components, which include heavy duty fitments and hinges ensuring long life and durability. This completely avoids the need for fancy fitments in the kitchen.

The concept of setting up a Bethliving home decor is very simple. On offers is a wide range of floor units which will include drawers, door units corner units, tall units, pullout units or a similar variety of options for all rooms. The range also includes wall mounted units of different specifications. Choice of the right combination of these units and assembling them at the site before laying the kitchen top of your choice will form your kitchen or your home decor in any room.

The products are manufactured out an extremely unique concept of fully fitted modules. Manufactured on a production line, they are put to strict quality controls and tested for all the functionalities they are meant for. This reduces the installation process to a just placement of modules one next to other with hardly any skills at the site while ensuring all the functionalities they are meant to deliver.

This high-quality pre-engineered module concept ensures we are free from months-long installation processes and reduces them to a matter of few hours.

 

Options of Multiple colors: Who doesn’t like a bit of color in their home interiors. You will have a verity of colors to choose from, 30 to be precise. You will have a variety of textures ranging from antique finishes to wood to choose from beside.

But it just doesn’t stop there, you want to create an extremely unique signature of your own in your interior, rely on modern engineering to transfer anything you could imagine and digitize on to your home decor product using a very unique technology of transfer printing.

Today, these engineering marvels are available to every room of your house starting from kitchen, wardrobes, living and other interior applications in your home. Our world-class products are backed by an award-winning manufacturing process. We are making it accessible and affordable through a very innovative and design right winning products. This standardization would ensure that the products are manufactured in a Factory with the best quality assuring process. This is a far cry from conventional methods of customizing and site suiting to site conditions. This will also ensure definitive execution time.

Time for a better choice is NOW. Explore and touch the future.